CEI EN/IEC 61587-3 - MEASURING THE ELECTROMAGNETIC SHIELDING EFFECTIVENESS OF CABINETS AND SUBRACKS
The standard CEI EN/IEC 61587-3
specifies the tests for empty cabinets and subracks concerning electromagnetic shielding performance
, in the frequency range of 30 MHz to 3 GHz (3000 MHz).
Stipulated attenuation values are chosen for the definition of the shielding performance level of cabinets or subracks for the IEC 60297-3 and IEC 60917 series.
The shielding performance levels are chosen with respect to the requirements of the typical fields of industrial application. They will support the measures to achieve electromagnetic compatibility but cannot replace the final testing of compliance of the equipped enclosure.
The purpose of this standard is to ensure physical integrity and environmental performance of enclosures such as cabinets and subracks, taking into account the need for different levels of performance in different applications.
It is intended to give the user a level of confidence in the selection of products to meet his specific needs.
This standard in whole or in part applies only to the empty enclosures
, for example cabinets and subracks according to IEC 60297 and IEC 60917
and does not apply to the enclosures when electronic equipment is installed
Chassis may be tested in the same way as subracks and cases may be tested in the same way as cabinets.
This standard was developed in close relationship to IEC 61000-5-7
but with the specific focus on subracks and cabinets and the determination of performance levels at the chosen frequency range.
Emctest Technologies is a laboratory that performs shielding effectiveness tests on site
, directly to the customer, in Italy and in Europe
, or at its headquarters in Rimini - Italy.
We perform shielding effectiveness tests for several sectors:
Typical shielding effectiveness measurement frequencies are: 10 kHz, 100 kHz, 1 MHz, 10 MHz, 30 MHz, 100 MHz, 500 MHz, 1 GHz, 10 GHz, 18 GHz, 26.5 GHz and 40 GHz.
Our lab test can perform shielding effectiveness measurements up to 50 GHz.
Read more about it going back to the home page. Or if you are looking for a lab in order to test your product contact us via email or by phone simply clicking here.
Measurements are made according to customer specifications or in accordance with the main standards as below: